Advertisement
Replacing the Battery
To replace the battery, refer to Figure 5.
General Specifications
Power Meter Specifications
Output:
Input Connector Type:
Photodetector Type:
Application Range:
Calibrated wavelengths:
Acceptable fiber types
(sizes):
Operating range:
Maximum power level:
Absolute accuracy:
Relative accuracy:
Repeatability:
Battery type:
Battery life:
Low battery indication:
Operating temperature:
Storage temperature:
Humidity:
Electromagnetic
Compatibility:
RF Field ≤1 V/m
RF Field = 3 V/m
Figure 5. Battery Replacement
1 mV per 1 dB
Fixed ST
Germanium
800 to 1600 nm
850, 1300, and 1550 nm
9/125 to 100/140 µm
+3 to -50 dBm
+5 dBm
±0.25 dB, (Specified at 25°C &
-10.0 dBm per NIST standard)
±0.15 dB, (Specified over any 10 dB
within measurement range)
±0.04 dB
9V alkaline, NEDA 1604A or IEC 6LR61
16 hours minimum, 100 hours typical, 9V
alkaline
Blinking LED indicator
0 to +40°C
-20 to +70°C
0 to 40°C, up to 75% RH
Total Accuracy =
Specified Accuracy
Specified Accuracy + 2.5 dB
aj5f.eps
Advertisement
