Getting Service; Replacing The Battery - Fluke FiberInspector FT500 Instruction Sheet

Replacing the Battery

Replace the NiMH battery when its life becomes noticeably shorter.
To replace the battery, use the hex key provided to remove the
battery door screw. Remove and disconnect the battery. Connect and
install the new battery, running the battery wires around, not under,
the battery. Replace the battery door and secure it with the hex
screw.

Getting Service

Contact Fluke Networks for information on authorized Fluke
Networks service centers.
Accessories
The following accessories are available from Fluke Networks for the
FT500 FiberInspector Mini video microscope. Visit the Fluke Networks
www.flukenetworks.com
website at
equipment and accessories.
TPak TM meter hanging kit
(Lets you hang the display from a
strap or a magnet.)
Fiber Optic Cleaning Kit
Accessory tip set
(LC, FC, and universal 1.25 mm)
NiMH battery pack
AC adapter/charger (100 V-240 V)
Registration
Registering your product with Fluke Networks gives you access to
valuable information on product updates, troubleshooting tips, and
other support services. To register, fill out the online registration
form on the Fluke Networks website at
registration
.
Description
for a complete list of fiber test
Fluke Networks Model
TPAK
NFC-Kit-Case
NFM110
NFM120
Contact Fluke Networks
www.flukenetworks.com/