Headlights / Backlighting; Walk Assistance; Battery Capacity Indication - BAFANG DP C07.CAN User Manual

7.6.4 Headlights / backlighting

Hold (>2S) the
headlight and the display backlight.
Hold (>2S) the
off the headlight and the display backlight.
The brightness of the backlight can be set
in the display settings "Brightness". (If the
display /Pedelec is switched on in a dark
environment, the display backlight/head-
light will automatically be switched on. If
the display backlight/headlight has been
manually switched off, the automatic sensor
function is deactivated. You can only turn
on the light manually after switching on the
system again.)

7.6.5 Walk Assistance

The Walk assistance can only be activated
with a standing pedelec.
Activation: Briefly press (<0.5S) the
button until to level null, and then press
(<0.5s) the button, the
displayed. Now hold down the
and the Walk assistance will activate. The
symbol will flashes and the pedelec
moves approx. 4.5 km/h. After releasing the
button, the motor stops automatically and
switches back to level null (if no any option
be activated in 5 second). If no speed signal
is detected, it shows 2.5km/h.
button to activate the
button again to turn
symbol is
button

7.6.6 Battery capacity indication

The battery capacity is showed in ten bars.
Each full bar represents a remaining capacity
of the battery in a percentage, if the frame
of indicator blinks that means to charge. (as
shown in the figure below):
Bars
10
9
8
7
6
5
4
3
2
1
Blinking
6 BF-UM-C-DP C07-EN November 2019
Charge in Percentage
≥90%
80%≤C<90%
70%≤C<80%
60%≤C<70%
50%≤C<60%
40%≤C<50%
30%≤C<40%
20%≤C<30%
10%≤C<20%
5%≤C<10%
C≤5%