V 2.1
SPECIFICATIONS
Voltage
Current
Frequency
No Load Speed
Max. Cutting Capacity Aluminum
Max. Cutting Capacity Sheet Metal
Dimensions
Net Weight
SAFETY
IMPORTANT SAFETY PRECAUTIONS
WARNING! Read and understand all instructions before using this tool. The operator must follow basic
precautions to reduce the risk of personal injury and/or damage to the equipment. Before allowing someone
else to use this tool, make sure they are aware of all safety information.
WARNING! The warnings, cautions and instructions discussed in this instruction manual cannot cover all
possible conditions and situations that may occur. Common sense and caution are factors that cannot be built
into this product, but must be supplied by the operator.
NOTE: Keep this manual for safety warnings, precautions, operating, inspection and maintenance instructions.
WORK AREA
1. Operate in a safe work environment. Keep your work area clean and well lit.
2. Keep anyone not wearing the appropriate safety equipment away from the work area.
3. Minimize distractions in the work environment. Distractions can cause you to lose control of the tool.
4. Store tools properly in a safe and dry location to prevent rust or damage.
5. Always lock up tools and keep them out of the reach of children.
For technical questions call: 1-800-665-8685
14 Gauge
Electric
Metal Shear
120V AC
3.5A
60 Hz
1,800 RPM
14 gauge
14 gauge
3 in. W x 11.75 in. L x 5.5 in. H
5.8 lb
8083115
3