Troubleshooting; Parts Breakdown - Power Fist 8083115 User Manual

8083115
LUBRICATION
Only use the lubricants supplied with the tool or specified by the manufacturer. Other lubricants may not be suitable
and may damage the tool or cause a malfunction during use.
1. Plug in the tool, turn it on and let it run freely for one minute.
2. After the tool has run for one minute, turn it off and put 3-4 drops of light machine oil in the oil port on the
head of the tool (See image below).
3. Also apply a small amount of oil to the space between the arbor and the shaft sleeve.
CAUTION! NEVER use a penetrating oil to lubricate the tool. Penetrating oil may act as a solvent that will break
down the grease and cause the tool to seize up.
STORAGE
When not in use for an extended period, apply a thin coat of lubricant to the steel parts to avoid rust. Remove the
lubricant before using the tool again.
DISPOSING OF TOOL
If your tool has become damaged beyond repair, do not throw it out. Bring it to the appropriate recycling facility.
TROUBLE SHOOTING
If the tool does not function properly or if it is missing parts, contact Princess Auto Ltd. for a solution. If unable to
do so, have a qualified technician service the tool.

PARTS BREAKDOWN

Visit www.princessauto.com for more information
14 Gauge Electric Metal Shear V 2.1
13