4
76
Press button 1 repeatedly un-
til desired heating level 2 is
shown.
z
The handlebar grips can be
heated at two different levels.
The adjusted level is shown
in the multifunction display, at
position 1.
50 % heating output
100 % heating output
The 2nd heating level is used
for fast heat-up of the grips;
then the switch should be
switched back to the 1st level.
If no further changes are made
the selected heating level is
adopted as the setting.
To switch off heated grips,
press button 1 until heated grip
symbol 2 is no longer shown in
the display.
Mirrors
Adjusting mirrors
Move mirror into desired posi-
tion by twisting.
Adjusting mirror arm
Slide protective cap 1 up over
screw connection on mirror
arm.
Loosen the nut 2.
Turn mirror arm into desired
position.
Tighten the nut to the spec-
ified torque while holding the
mirror arm to ensure that it
does not move out of position.
Mirror (locknut) on
adapter
16 lb/ft (22 Nm)