BMW R 1200 GS 2014 Rider's Manual page 135

Remove negative battery ca-
ble 1 and rubber strap 2.
Pull mounting plate on posi-
tion 1 outward and remove it
upward.
Slightly lift and remove battery
from holder until positive termi-
nal becomes accessible.
Remove positive battery ca-
ble 1 and pull out battery.
If the 12 V battery is in-
stalled incorrectly, or if the
terminals are interchanged (dur-
ing jump-starting, etc.), the fuse
for the voltage regulator may
burn through.
Fasten positive battery cable 1.
Slide battery into holder.
First, insert mounting plate into
supports 1. Next, press it un-
der the battery at position 2.
7
133
z