Brother LX-1200 Owner's Manual page 14

Note
If you use the adhesive laminate film, the
back surface of the laminated output is a liner
which will need to be peeled off. To mount
the laminated document on a surface for
display, peel off the liner as illustrated.
For easy peeling, there is a crack in the liner
approx. 1" from the right side.
Note
If you use the magnetic back laminate film,
you can place the output on metal surfaces.
There is a liner on the back surface of the
laminated output (magnet side). Please peel
the liner off gently as illustrated before placing
the output sheet on a metal surface.
- 12 -