Brother LX-1200 Owner's Manual page 35

(4)Remove the film cartridge from the machine.
Note
Use scissors or Cut to extract the jammed film
and remove the film cartridge, if necessary.
(5)Open the cartridge shutter and remove the
document from the film slit of the cartridge.
Note
Do not pull the document from the opposite
side.
(6)Remove any excess laminating film by cutting
along the engraved "cutting line" on the
cartridge before reinserting the cartridge.
Note
Make sure that the shutter of the cartridge is
closed. If open, push the shutter buttons to
close the shutter.
(7)Place the film cartridge into the machine.
Note
Make sure that the film is installed correctly.
- 33 -