Mounting The Bus Module For F-Rsm And Mounting The Repair Switch Module - Siemens Simatic ET 200pro FC Operating Instructions Manual

Installation
4.9 Mounting a fail-safe frequency converter
4.9.1

Mounting the bus module for F-RSM and mounting the repair switch module

The Safety Local function of the F-RSM, its use, control elements and connections are
described in detail in the manual
Therefore, only the most important points concerning its use with a frequency converter will
be covered here.
The 3RK 19222-BA01 bus module is required to accommodate a Safety Local repair switch
module. It is mounted to the left of the frequency converter bus module.
The Safety Local repair switch module is plugged onto its mounted backplane bus module
(1) and screwed with 3 recessed head screws to the rack (2).
Note
Make sure that the seal is cleanly seated and that the recessed head screws are tightened
with a torque of 1.5 Nm to ensure a tight arrangement.
Image 4-12
Tools required
Cross-tip screwdriver, size 2
60
SIMATIC ET 200pro Motor Starters
Mounting the repair switch module
.
Operating Instructions, 07/2016, A5E01100763B AC
ET 200pro FC