Change The Acc Es 8 Port Appliance Administrator Password; Manage Time Settings - Avigilon ACC VMA-ENVR1-8P4 User Manual

To...
Replace the default server name
with a user-friendly hostname
Set the time zone
Change the password for the
ACC ES 8 Port Appliance
administrator.
Install the latest version of the
firmware on your device.
Manage the certificates used by
Server Management and the
ACC ES 8 Port Appliance.
Change the ACC ES 8 Port Appliance Administrator Password
You can only change the password, not the default administrator username for Server Management.
1. On the navigation bar, click Device.
2. On the General panel locate the Password pane.
3. Enter your current password in the Old Password field.
4. Enter your new password in the New Password and Confirm Password fields.
A complex password is recommended.
Remember to save the password in a secure format and location either physically or digitally so that it can
be retrieved if the password is forgotten, and discard the record of the previous password.
CAUTION — You will lose recorded video and configuration data if you forget your
password. To reset the administrator password, you must reset the device to the factory
default settings. This will also format the hard drives and delete the configuration data and
recorded video. For more information on performing a factory restore, see
Factory Default Settings on

Manage Time Settings

Customize how the ACC ES 8 Port Appliance keeps time:
Change the ACC ES 8 Port Appliance Administrator Password
On the Setting
Device
panel
card...
Hostname
Change the Hostname.
The default hostname is the same as the server
name. The server name is in the form <Model>-
<Serial Number>.
Time
Specify the Time Zone and identify the time source
in the NTP drop-down and Servers list. See
Time Settings below
Password
See Change the ACC ES 8 Port Appliance
Administrator Password
Upgrade
See Upgrade the Firmware on
Firmware
Certificates See
Manage Certificates on
page 32.
Manage
below.
page 30.
page 27.
Restoring
14