Brother MFC-5860CN Network User's Manual page 55

(For Colour Display models)
Level1 Level2
LAN TCP/IP
Setup Misc.
Factory Default
1
On connection to the network, if the machine's BOOT Method is Auto the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169.254.[001-
254].[000-255]. If the BOOT Method of the machine is set to Static you will need to manually enter an IP address from the machine's control
panel.
Level3 Options
BOOT Method Auto/Static/RARP/BOOTP/DHCP
IP Address
[169].[254].[001-254].[000-255]
Subnet Mask
[255].[255].[000].[000]
Gateway [000].[000].[000].[000]
Node Name BRN_XXXXXX= (last 6 figures of Ethernet address)
(up to 15 characters)
WINS Config Auto/Static
WINS Server (Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
DNS Server (Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
APIPA On/Off
Ethernet Auto/100B-FD/100B-HD/10B-FD/10B-HD
1
1
Appendix A
A
49