Function Table And Default Factory Settings - Brother MFC-5860CN Network User's Manual

Function Table and Default Factory Settings

(For Monochrome Display models)
Level1 Level2
5.LAN 1.TCP/IP
2.Setup Misc.
0.Factory
Default
1
On connection to the network, if the machine's BOOT Method is Auto the machine will attempt to automatically set the IP address and Subnet
Mask from a boot server such as DHCP or BOOTP. If a boot server cannot be found, an APIPA IP address will be allocated, such as 169.254.[001-
254].[000-255]. If the BOOT Method of the machine is set to Static you will need to manually enter an IP address from the machine's control
panel.
Level3 Options
1.BOOT Method Auto/Static/RARP/BOOTP/DHCP
2.IP Address
[169].[254].[001-254].[000-255]
3.Subnet Mask
[255].[255].[000].[000]
4.Gateway [000].[000].[000].[000]
5.Node Name BRN_XXXXXX= (last 6 figures of Ethernet address)
(up to 15 characters)
6.WINS Config Auto/Static
7.WINS Server (Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
8.DNS Server (Primary)
[000].[000].[000].[000]
(Secondary)
[000].[000].[000].[000]
9.APIPA On/Off
1.Ethernet Auto/100B-FD/100B-HD/10B-FD/10B-HD
Appendix A
1
1
A
A
48