Restoring The Network Settings To Factory Default - Brother MFC-5860CN Network User's Manual

Restoring the network settings to factory default

If you wish to reset the print server back to its default factory settings (resetting all information such as the
password and IP address information), please follow these steps:
Note
This function restores all network settings to the factory default.
(For Monochrome Display models)
a
Make sure the machine is not operating, then disconnect all the cables from the machine (except the
power cable).
b
Press Menu, 5, 0.
c
Press 1 to select 1.Reset.
d
Press 1 to select 1.Yes.
e
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
(For Colour Display models)
a
Press Menu.
b
Press a or b to select LAN.
Press OK.
c
Press a or b to select Factory Reset.
Press OK.
d
Press 1 for Factory Reset.
e
Press 1 for Reboot.
Note
For DCP models, press + for Factory Reset and then press + for Reboot.
f
The machine will re-start. You can now reconnect the network cable and configure the network settings
to work with your network.
Control panel setup
3
3
3
3
25