Table of Contents
Advertisement
Available languages
Available languages
V4.0
6.
Do not exceed the load capacity. Know how much load you are pulling.
7.
Never use a 'cheater' pipe or other device to lengthen the handle for
additional leverage. This will cause the handle to bend or break thereby
destroying the tool.
8.
Do not operate the ratcheting cable puller with less than three wraps of the
cable on the ratchet drum.
9.
A cable that breaks under tension can whiplash and inflict death or a
serious injury. Use a winch rope dampener to absorb the cable's energy
should it break.
10. Do not lift or hoist a load with the cable puller.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the Identification Key are included.
IDENTIFICATION KEY
A
Anchor Hook
B
Stop Pawl
C
Ratchet Drum
D
Drive Pawl
Visit www.princessauto.com for more information
4 Ton Cable Puller with 3 Hooks
E
Drive Pawl Spring
F
Cable
G
Handle
H
Cable Guide
8823494
I
Anchor Point
J
Cable Hook
K
Pulley Hook
5
Advertisement
Table of Contents
