Pre-Scanning An Image - Brother MFC-3220C Software Manual

Pre-Scanning an image

Pre-Scanning allows you to scan an image quickly at a low
resolution. A thumbnail version will appear in the Scanning Area.
This is only a preview of the image, so you can see how it will look.
The PreScan button will allow you to crop unwanted areas from the
images. When you are satisfied with the preview, click Start to scan
the image.
1
Load your original.
2
Click PreScan.
The whole image will be scanned into your Macintosh
appear in the Scanning Area of the Scanner dialog box:
3
To scan a portion of the prescanned image, click and drag the
mouse to crop it.
4
Insert original in the ADF again.
If your model is a flatbed type, and you loaded the original on the
scanner glass in step 1, please skip this step.
5
Make your adjustments to the settings for Resolution,
Color Type (Gray Scale), Brightness, Contrast, and Size in
the Scanner Setup dialog box.
6
Click Start.
This time only the cropped area of the original will appear in the
Scanning Area.
7
In your editing software, you can refine the image.
USING YOUR MACHINE WITH A MACINTOSH
®
and will
®
9 - 14