Scan To File - Brother MFC-3220C Software Manual

Scan to File

When you select Scan to File you can scan a black and white or color
original and send it directly to a PC you designate on your network.
The file will be saved in the folder and file format that you have
configured in the Brother SmartUI on the designated PC. You can
Scan
change the
®
(For Windows
®
(For Windows
button configuration on page 4-5 to 4-11.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
Load your original.
2
Press
3
Press
to File .
Menu/Set
Press
4
Press
to.
Menu/Set
Press
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Black Start
Press
The machine will start the scanning process.
Max. 25 clients can be connected to one machine on a Network.
For example, if 30 clients try to connect at a time, 5 clients will
not be shown on the LCD.
NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY) 8 - 9
configuration.
98/Me/2000: See Scan to File on page 3-8 to 3-9.)
XP: See Hardware Section: Changing the Scan to
Scan
( ).
or to select Scan
.
or to select the destination PC you want to send
.
Color Start
or
Scan to File
.