Scan To Ocr - Brother MFC-3220C Software Manual

Scan to OCR

When you select Scan to OCR your original will be scanned and sent
directly to the PC you designated on your network. The Brother
SmartUI will activate ScanSoft
original into text for viewing and editing from a word processing
application on the designated PC. You can change the
configuration.
®
(For Windows
page 3-12 to 3-13.) (For Windows
Changing the Scan to button configuration on page 4-5 to 4-11.)
For Network Scanning the Brother Control Center (SmartUI)
selections are used only for configuring the Scan button. You
will not be able to initiate a network scan from the Brother
Control Center (SmartUI).
1
Load your original.
2
Press
3
Press
to OCR .
Menu/Set
Press
4
Press
to.
Menu/Set
Press
If the LCD prompts you to enter a PIN Number, enter the 4-digit
PIN Number for the destination PC on the control panel.
Black Start
Press
The machine will start the scanning process.
8 - 8 NETWORK SCANNING (MFC-3320CN AND MFC-3820CN ONLY)
®
98/Me/2000: See Scan to OCR (Word Processor) on
Scan
( ).
or to select Scan
.
or to select the destination PC you want to send
.
Color Start
or
®
TextBridge and convert your
®
XP: See Hardware Section:
Scan to OCR
.
Scan