Installing The Ink Cartridges - Brother MFC-3200C Quick Setup Manual

6

Installing the Ink Cartridges

Warning
If ink gets in your eyes irrigate them with water
immediately, and if irritation occurs consult a doctor.
1
Make sure that the power is turned on.
The LCD shows;
CHECK CARTRIDGE
2
Open the control panel cover by pulling it
toward you (1), then lift the top cover
toward the back (2).
The print heads will move to the ink
replacement position.
Top Cover
Control Panel Cover
3
Remove the protective blue tape from the
colored ink cartridge covers.
4
Push the four colored ink cartridge covers
one at a time so they pop up.
Colored Ink
Cartridge Covers
5
6
7
PUSH PUSH PUSH PUSH
Remove the white shipping cover by pulling
it towards you.
I The bottom of the white shipping cover is
wet with ink that will cause stains, so wipe
it clean before you place it down.
I Do not throw away the white shipping
cover. You will need it when you transport
the machine.
Take out black ink cartridge.
Carefully remove the sealing tape from the
bottom of the ink cartridge.
To prevent spilling ink and staining your
hands and clothing, peel the sealing tape
.
gently and slowly
Do not touch the ink opening on the
cartridge or removed tape.
To be continued
White Shipping Cover
Opening
5