Table of Contents
Advertisement
Step A:Color Block
Quality Check
1
The LCD shows:
IS STEP "A" OK?
1.YES 2.NO
Check the quality of the four color blocks
printed on the sheet.
(BLACK/CYAN/YELLOW/MAGENTA)
2
If the quality is OK for all colors, press the
key on the dial pad to go to STEP B :
Alignment Check.
---OR---
If white horizontal lines appear in some of
the color blocks, press the
dial pad and go to
OK
3
The LCD asks you if the print quality is OK for each
color. Press the
key or
BLACK OK?
1.YES 2.NO
When you have finished selecting the
key (YES) or the
the LCD shows:
START CLEANING?
1.YES 2.NO
Press the
key (YES), and then MFC
starts cleaning the colors.
After cleaning is finished, press the Black
Fax Start key. The MFC starts printing
PRINT QUALITY CHECK SHEET again
and goes back to the first step of STEP A.
key on the
3
.
Poor
key on the dial pad.
key (NO) for magenta,
Step B:Alignment Check
1
The LCD shows:
IS STEP "B" OK?
1.YES 2.NO
Check the 600 DPI and 1200 DPI test print
to see if No.5 most closely matches the OK
sample (No.0). Press the
matches it.
600 DPI
If another test print number is a better match
for either 600 DPI or 1200 DPI, press the
key to select NO and go to
2
For 600 DPI, select the number from 1 to 8
that most closely matches the No.0 sample
and enter it using the dial pad.
600DPI ADJUST
SELECT BEST #
3
For 1200 DPI, enter the number from 1 to 8
that most closely matches the No.0 sample.
1200DPI ADJUST
SELECT BEST #
The Quality check is now complete.
key if No.5
No.5
600 DPI
1200 DPI
1200 DPI
2
.
7
Advertisement
Chapters
Table of Contents
