Setting Up The Mfc; Removing The Protective Yellow Bar; Install Handset - Brother MFC-3200C Quick Setup Manual

Step 1
Removing the Protective
1
Yellow Bar
Do NOT connect the USB cable.
Connecting the USB cable is done
when installing the driver.
1
Open the control panel cover by pulling it
toward you (1), and then lift the top cover
toward the back (2).
Control
Panel Cover
2
Pull the protective yellow bar out of the
machine.
Do not throw away the protective yellow bar.
You will need it in the future to transport the
machine.
3
Close the top cover, and then close the
control panel cover.
2

Setting Up the MFC

Top Cover
Protective Yellow Bar
2

Install Handset

1
Connect the curled handset cord to the
MFC and the other end to the handset.