Installation of Brother Native Drivers For
®
Windows
Make sure that you have completed the instructions in steps 1 to 20 on
pages 17 to 20.
Make sure that USB cable is connected between the MFC and your PC and
both powered ON.
K
Click "Start" and select "Printers and
Faxes".
L
Click on "Add a printer" and the Add Printer
Wizard will start.
M
When the above screen appears, click
Next.
N
Un-check the "Automatically detect and
install the Plug and Play printer" selection
and then click Next.
XP
O
Select "USB00x (Virtual printer port for
USB)" from the pull down window for the
Printer Port Selection and then click Next.
P
Click on Have Disk.
Q
Browse the CD-ROM for the "WXP" folder.
Highlight the WXP folder and click Open.
Highlight the "Addprt" folder and click
Open.
To be continued
21