Using I-Arpeggio Sync Mode; Controlling From An External Device - Roland Jupiter-Xm Reference Manual

Reference Manual Ver. 1.5 and later

Using I-ARPEGGIO Sync Mode

1 .
Press the [MENU] button .
2 .
Use the [1] knob to select
[ENTER] button .
You can also make this selection by using the
instead of the [1] knobs.
3 .
Use the [1] knob to select
to specify either "BEAT"
BEAT: The arpeggio plays in synchronization with the beat.
MEASURE: The arpeggio plays in synchronization with the measure.
4 .
To save the setting, perform the system write operation .
&
"Saving the System Settings (System Write)"

Controlling from an External Device

You can operate the JUPITER-Xm via the MIDI IN connector, USB MIDI IN
port, or by using controllers such as a damper pedal etc. connected to the
rear panel.
&
"List of functions that can be assigned to the controllers"
40
"SYSTEM," and then press the
PAGE [ ] [ ] button
"Arp Sync," and use the [2] knob
or "MEASURE . "
(p. 42)
(p. 45)