Using The Scene Lock Function; Initializing A Scene; Selecting Sounds And Model Banks; Playing The Model Bank Tones (Single Setup) - Roland Jupiter-Xm Reference Manual

Reference Manual Ver. 1.5 and later

Using the Scene Lock Function

By using the scene lock function, you can make a confirmation screen
appear when you change scenes. This helps keep you from accidentally
selecting a different scene when you haven't saved the scene.
1 .
Press the [MENU] button .
The setting screen appears.
2 .
Use the [1] knob to select
[ENTER] button .
You can also make this selection by using the
instead of the [1] knob.
3 .
Use the [1] knob to select
knob to turn it "ON . "
4 .
To save the setting, press the
A confirmation message appears.
If you decide to cancel, press the
5 .
To execute, press the [ENTER]

Initializing a Scene

* When you initialize a scene, all settings saved in the scene are erased. Please
note that the data cannot be recovered.
* Initializing the scene settings also initializes the tones of PART 1–4 at the same
time.
1 .
Press the [SCENE] button, and then press the
button .
The WRITE MENU screen appears.
2 .
Use the [1] or [2] knob
then press the [ENTER]
3 .
To execute, press the [ENTER]
The scene is initialized.

Selecting Sounds and Model Banks

The JUPITER-Xm is equipped with multiple sound engines called
and each model has a diverse variety of sounds.
By using categories, you can narrow your focus to specific types of
instruments or sounds across all of the sound engines.
Playing the MODEL BANK Tones
When SINGLE SETUP is executed, only part 1 is enabled, and you can
perform with the tones of only one model.
1 .
Hold down the [SHIFT] button
button .
A confirmation message for executing SINGLE SETUP is shown.
2 .
Press the [ENTER] button
3 .
Press the [MODEL BANK]
4 .
Use the [1]–[16] buttons
use the [2] knob to select a tone .
14
"SYSTEM," and then press the
PAGE [ ] [ ] buttons
"Scene Lock," and then use the
[WRITE] button .
[EXIT] button.
button .
[WRITE]
to select the "SCENE INITIALIZE,"
button .
button .
(SINGLE SETUP)
and press the [MODEL BANK]
to execute SINGLE SETUP .
button .
to select a model/category, and
Useful functions for selecting tones on the
MODEL BANK screen
5
Press the [ENTER] button
[ENTER] button
were using before the tone list screen was displayed.
5
Press the PAGE [ä] button
select a model or category. Press the
a tone.
* When SINGLE SETUP is executed, the scene data you were editing is lost. Save
the data if you want to keep it before executing SINGLE SETUP.
&
"Saving a Scene"
* The parameters that work with the controllers on this instrument differ with
each model. Refer to
(p. 27) for details.
[2]
* The SINGLE SETUP state is canceled when you switch scenes.
* You can also execute SINGLE SETUP from the MENU screen
SETUP]).

Selecting Sounds

1 .
Press the [MODEL BANK]
The MODEL BANK TOP screen appears.
Model/category
and
Tone number
2 .
"models, " Press the PAGE [ ] button
category name .
3 .
Use the [2] knob
4 .
Press the PAGE [ ] button
number .
5 .
Use the [2] knob
Select the desired tone from the selected model and category.
You can use the
MEMO
When the cursor is located at the model name or tone number, you can
press the [ENTER] button
You can use the
[2] knob to select the sound.
6 .
Press the [ENTER] button
to select a tone from the tone list screen. Press the
to confirm. Press the [EXIT] button
to move the cursor up. You can use the
PAGE [å] button
(p. 13)
"Correspondence Between Controllers and Parameters"
button .
Model name/category name
Tone name
to move the cursor to the model/
to select the model/category .
to move the cursor to the tone
to select a tone .
[1] knob to move rapidly.
to access the tone list.
PAGE [<] [>] buttons to switch the MODEL, and use the
to confirm the tone .
to return to the tone you
[2] knob to
to go back to selecting
([MENU]–[SINGLE