Figure 47 Switch Management
The following table describes the labels in this screen.
Table 16 Switch Management
LABEL
DESCRIPTION
Device Setting
Reset
Click this button to clear all Switch configuration information you configured and return to the
factory defaults.
If you want to access the Switch Web Configurator again, you may need to change the IP
address of your computer to be in the same subnet as that of the default Switch IP address
(192.168.1.3).
Reboot
Click this button to restart the Switch without physically turning the power off.
Firmware
Click this button to upgrade the latest firmware to the Switch.
Upgrade
DHCP Client
Select Enable if you have a DHCP server that can assign the Switch an IP address, subnet mask,
a default gateway IP address and a domain name server IP address automatically. Otherwise,
select Disable.
Chapter 14 Management
GS1200 Series User's Guide
64