Change The Password - ZyXEL Communications GS1200 Series User Manual

On your web browser, go to http://192.168.1.5.
5
A Log in screen appears. Enter the existing password and click SIGN IN to log in via the new IP address.
6

5.1.2 Change the Password

The first time you log in to the Web Configurator, you will be asked to change the default password
1234. If you wish to change the password again, perform the following steps:
Click Management in the navigation panel to open the following screen.
1
Figure 20 Change the Password
Enter the existing password in the Old Password field.
2
Enter the new system password in the New Password field using the keyboard characters (a – z, A – Z, 0 –
3
9). The password must be 8 to 15 characters long.
Enter the new password again to in the Confirm Password field for confirmation.
4
Click Apply. You will automatically be logged out of the Web Configurator.
5
A Log in screen appears. Enter the new password and click SIGN IN to log in using the new password.
6
Chapter 5 Initial Setup Example
GS1200 Series User's Guide
25