Delivery Set; Technical Specifications - Vitek VT-1442 Manual Instrucitons

whisk in reverse sequence: - Install the shaft
gear, then install the whisks (pic. 6).
Clean the motor unit (6) with a soft, slightly
–
damp cloth and then wipe it dry.
Do not immerse the scale, the kitchen machine,
–
the power cord and the power plug into water
or any other liquids.
Provide that no water or detergent gets inside
–
the motor unit (6).
Clean the scale with a soft, slightly damp cloth
–
and then wipe it dry. Do not immerse the scale
into water or any other liquids.
Use neutral detergents and cleaning agents to
–
remove dirt; do not use metal brushes, abra-
sive detergents and solvents.
STORAGE
Clean the unit.
–
Remove the battery from the scale if you are
–
not planning to use the scale for a long time.
Keep the unit in a dry cool place away from
–
children and people with disabilities.

DELIVERY SET

Kitchen machine with electronic scale – 1 pc.
Bowl lid – 1 pc.
Bowl – 1 pc.
Attachments – 2 pcs.
CR2032 battery – 1 pc.
Instruction manual – 1 pc.

TECHNICAL SPECIFICATIONS

Power supply: 220-240 V ~ 50 Hz
Rated input power: 1200 W
Maximal power: 1400 W
Scale
Power supply: 3 V, «CR2032» battery (supplied
with the unit)
Maximal capacity of scale: 5 kg
Scale division value: 1 g*
* For household kitchen scales the extent of error
is not specified, so it is not stated in technical
specifications.
The term «extent of error» is used for indus-
trial, analytical and medical scales. These
IM VT-1442.indd 7
scales have pattern approval certificates
which confirm the measurement accuracy.
Moreover, specially appointed organizations
perform annual «measurement accuracy con-
firmation» (checking) to confirm the scales
accuracy.
RECYCLING
For environment protection do not throw out the
unit and the batteries (if included), do not discard
the unit and the batteries with usual household
waste after the service life expiration; apply to
specialized centers for further recycling.
The waste generated during the disposal of the
unit is subject to mandatory collection and con-
sequent disposal in the prescribed manner.
For further information about recycling of this
product apply to a local municipal administration,
a disposal service or to the shop where you pur-
chased this product.
The manufacturer preserves the right to change
design, structure and specifications not affecting
general principles of the unit operation without a
preliminary notification due to which insignificant
differences between the manual and product may
be observed. If the user reveals such differences,
please report them via e-mail info@vitek.ru for
receipt of an updated manual.
Unit operating life is 3 years
Guarantee
Details regarding guarantee conditions can be
obtained from the dealer from whom the appli-
ance was purchased. The bill of sale or receipt
must be produced when making any claim under
the terms of this guarantee.
This product conforms to the EMC Directive
2014/30/EU and to the Low Voltage
Directive 2014/35/EU.
7
ENGLISH
9/25/19 12:17 PM