For Mac Os; 10.1/10.2.1 Or Greater - Brother DCP-8040 Quick Setup Manual

Step 2
For USB Interface Cable Users

For Mac OS

Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 2 - 5.
For Mac OS
to Mac OS
information for Mac OS
http://solutions.brother.com)
1
Disconnect the DCP from the power socket
and from the Macintosh
already connected an interface cable.
2
Turn on your Macintosh
3
Insert the supplied CD-ROM into your
CD-ROM drive.
4
Double-click the Start Here OSX icon to
install the printer driver, Scanner driver and
Remote Setup program. If the language
screen appears, select your language.
5
Click MFL-Pro Suite to install.
34
Installing the Driver & Software
®
X 10.1/10.2.1 or greater
®
X 10.2.0 user, please upgrade
®
X 10.2.1 or greater. (The latest
®
X, please visit at:
®
, if you have
®
.
6
Follow the on-screen instructions, and
restart your Macintosh
7
After the DeviceSelector window appears,
connect the USB interface cable to your
®
Macintosh and then to the machine.
The DeviceSelector window will not appear if
the USB interface cable has been connected
before restarting your Macintosh
overwriting a previously installed version of
the Brother Software. If you encounter this
problem continue with the installation skipping
step 10 and then see the Software User's
Guide Chapter 7 for details on selecting what
machine the ControlCenter2.0 will connect
with.
8
Connect the USB interface cable to your
®
Macintosh , and then connect it to the DCP.
DO NOT connect the DCP to a USB
port on a keyboard or a non powered
USB hub.
9
Plug in the power cord and turn on the DCP.
®
.
®
or if you are