For Network Interface Cable Users (For Windows ® 98/98Se/Me/Nt/2000 Professional/Xp) - Brother DCP-8040 Quick Setup Manual

For Network Interface Cable Users
(For Windows
Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 2 - 5.
Before installation, if you are using Personal
Firewall software, disable it. Once you are
sure that you can print, re-start your
Personal Firewall software.
1
Make sure that the NC-9100h (Network
Print/Fax Server) is installed into the DCP.
(See "Optional accessories" in Chapter 8 of
the User's Guide.)
2
Connect the network cable to the DCP, and
then connect it to a free port on your hub.
3
Plug in the power cord and turn on the DCP.
4
Turn on your computer.
®
(For Windows 2000 Professional/XP/
®
Windows NT 4.0, you must be logged on
as the administrator.)
®
98/98SE/Me/NT/2000 Professional/XP)
5
Insert the supplied CD-ROM into your
CD-ROM drive. If the model name screen
appears, select the DCP. If the language
screen appears, select your language.
6
The CD-ROM main menu will appear.
Click Install MFL-Pro Suite.
If this window does not appear, use
®
Windows Explorer to run the setup.exe
program from the root directory of the
Brother CD-ROM.
If you see the following screen, click OK to
install the Windows
updates are installed your PC may restart.
Then the installation will automatically
continue.
If the installation does not continue
automatically, please open the main menu
again by ejecting then reinserting the
CD-ROM disc or double-click the setup.exe
program from the root directory, and
continue from Step
MFL-Pro Suite.
®
updates. After the
6
to install the
Continued ...
29