Brother DCP-8040 Quick Setup Manual page 18

Brother Native driver Installation
B
Click Start and select Printers and Faxes.
Click on Add a printer and the Add Printer
Wizard will start.
When this screen appears, click Next.
C
Un-check the Automatically detect and
install my Plug and Play printer selection
and then click Next.
D
Select USBXXX from the pull down window
for the Printer Port Selection and then click
Next.
E
Click on Have Disk.
F
Browse the CD-ROM and highlight your
language folder and click Open. Highlight
the WXP folder and click Open. Highlight
the Addprt folder and click Open.
G
Click Open.
H
Make sure X:\ENG\WXP\Addprt is
displayed in the window and click OK (X:\ is
the drive letter of your CD-ROM).
Continued ...
15