For USB Interface Cable Users
Make sure that you followed the instructions in
When the screen appears, connect the USB
interface cable to your PC, and then
connect it to the DCP.
Plug in the power cord and turn on the DCP.
It will take a few seconds for the installation
screens to appear.
The installation of the Brother drivers will
automatically start. The installation screens
appear one after another, please wait for a
Installing the Driver & Software
98/98SE/Me Users Only
on pages 8 - 9.
When the Brother on-line Registration
screen is displayed, make your selection
and follow the on-screen instructions.
When the following screen appears, click
Finish and wait as the PC restarts Windows
and continues the installation.
If the installation is unsuccessful, try
installing again using the Repair MFL-Pro
Suite option from the main menu. Select
Repair MFL-Pro and follow the instructions
on the screen.
The MFL-Pro Suite, Printer driver and
Scanner driver have been installed and
the installation is now complete.