For Mac Os; 10.1/10.2.1 Or Greater - Brother DCP-8040 Quick Setup Manual

Step 2
For Network Interface Cable Users

For Mac OS

Make sure that you have completed the instructions from Step 1 "Setting Up
the Machine" on pages 2 - 5.
1
Make sure that the NC-9100h (Network
Print/Fax Server) is installed into the DCP.
(See "Optional accessories" in Chapter 8 of
the User's Guide.)
2
Disconnect the DCP from the power socket
and from the Macintosh
already connected an interface cable.
3
Turn on your Macintosh
4
Insert the supplied CD-ROM into your
CD-ROM drive.
5
Double-click the Start Here OSX icon to
install the printer driver and Remote Setup
program. If the language screen appears,
select your language.
6
Click MFL-Pro Suite to install.
38
Installing the Driver & Software
®
X 10.1/10.2.1 or greater
®
, if you have
®
.
7
Follow the on-screen instructions, and
restart your Macintosh
8
After the DeviceSelector window appears,
connect the network interface cable to your
®
Macintosh and then to the machine.
The DeviceSelector window will not appear if
you have also connected a USB interface
cable to the machine before restarting your
®
Macintosh or if you are overwriting a
previously installed version of the Brother
Software. If you encounter this problem
continue with skipping steps 11 through 13
and then see the Software User's Guide
Chapter 7 for details on selecting what
machine the ControlCenter2.0 will connect
with.
9
Connect the network interface cable to the
DCP, and then connect it to a free port on
your hub.
0
Plug in the power cord and turn on the DCP.
®
.