Safety Regulations; Circumference And Interval (Rule-Of-Thumb) - GLP YPOC 250 Color Instruction Manual

A soft lint-free cloth moistened with any good glass cleaning fluid is recom-
mended, under no circumstances should alcohol or solvents be used!
The inside optical system should be maintained only by authorized persons. Please
contact your local dealer.

6.1 Safety Regulations

• Pull out the main plug!
• Wait min. 20 minutes after the last operation to cool down the fixture.
• Before you put the
otherwise your retina can be hurt!

6.2 Circumference and Interval (rule-of-thumb)

The contamination of the fixture depends on the environment details. Therefore
no general guidelines can be given. From this it follows that the intervals are only
suggestions from our practice experience.
Position
Outside optic
Color filter
Beam shape
Dimmer/Shutter
Fan and air channel
Reflector
Lampe
Moveable parts
Attention:
• Never let optical parts come into contact with oil or fat.
• Before running the fixture wait until all parts are dried up.
• Never clean the aspheric lens with water or other cleaners. Change the
lens if it looks milky (about 1-2 years). For that please contact your local
dealer.
GLP German Light Production
Y P O C 2 5 0 C O L O R into operation close the casing,
Y P O C 2 5 0 C O L O R
Interval
weekly
monthly
monthly
yearly
monthly
yearly
never
yearly
(V1.42)
In this way
soft cloth and glass cleaning fluid
soft cloth and glass cleaning fluid
soft cloth and glass cleaning fluid
vacuum cleaner, airbrush, etc.
vacuum cleaner, airbrush, etc.
soft cloth and glass cleaning fluid
suitable fatty oil
21