Power Fist Air Line Delivery Kit Manual page 5

V1.1
AIR TOOL PRECAUTIONS
1. Use only clean and dry compressed air as a power source. Contaminated
or moist air will gradually damage the tool.
2. Install an in-line shutoff valve or regulator to allow immediate control
over the air supply in an emergency, even if a hose is ruptured.
3. Check the manufacturer's maximum pressure rating for air tools and
accessories. Compressor outlet pressure must be regulated to never
exceed the maximum pressure rating of the tool (see Specifications).
Exceeding the maximum PSI rating can create a bursting hazard, causing
injury and property damage.
4. Attach all accessories properly to the tool before connecting the air
supply. A loose accessory may detach or break during operation.
5. Never use oxygen, combustible gas or any other bottled gas as a power
source. Any power source other than an air compressor could cause an
explosion and serious personal injury.
6. Turn OFF the valve and discharge any remaining air pressure after each
use or before adjusting the tool.
7. Inspect the air hose for cracks, fraying or other faults before each use.
Discontinue use if the air hose is damaged or hissing is heard from the
air hose or couplers. Replace the defective air hose.
8. Do not allow people, mobile equipment or vehicles to pass over the
unprotected air hose.
UNPACKING
WARNING! Do not operate the tool if any part is missing. Replace the
missing part before operating. Failure to do so could result in a malfunction
and personal injury.
Remove the parts and accessories from the packaging and inspect for damage.
Make sure that all items in the Identification Key are included.
Visit www.princessauto.com for more information
Air Line Delivery Kit 8881039
5