Table of Contents
Advertisement
or Movie options in this menu.
(c) USB Recording
This function is available only when a USB storage device is
connected to the receiver.
•
Instant recording:
If you want to start recording a live show, which is currently
being broadcast, go to the desired channel and press the
REC button on the remote. Press Stop Button which is white
square (Above the Green Subtitle button) to stop recording.
By pressing REC button twice, you are able to adjust the
recording duration.
•
Schedule a Recording:
To schedule a recording before broadcast (e.g. record your
favourite show while you're out), follow these steps:
Through EPG:
› Press EPG to open the full listings.
› Select the TV channel.
› Press OK to go to Program listing area.
› Select the TV show you want to record.
› Press REC button to save a timer.
› If you want to change any settings, press the Red
button on the Remote to Edit the timer.
Through Manual Timer: Menu > Time/Timer Manager
> Event Timer. Or, press TIMER Button on Remote.
› This will display all scheduled recordings (through EPG
or Manual Timer).
› Then press the RED button on the remote to add, or
YELLOW to delete or GREEN to edit the timer.
(d) Time shift (pause & rewind Live TV)
•
To activiate Time Shift, press PLAY Button on remote (above
Yellow button).
•
This will pause the currently viewed program and allow you to
resume watching from this point by pressing the PLAY button
again.
•
Press STOP button twice (white square button above green
button) to end the time-shift function.
17
Advertisement
Table of Contents
