Administrating The Network For Sitrans Cc220; Powering Up Sitrans Ms200 - Siemens SITRANS SCM IQ Operating Instructions Manual

Commissioning

7.4 Powering up SITRANS MS200

7.3

Administrating the network for SITRANS CC220

Required user role
Network administrator of your side.
Procedure
1. Consider the choice of your network settings in SITRANS SCM IQ (Page 41) according to your
network policies ("DHCP" or "Static IP").
2. Make sure the UDP port 123 is accessible in the network.
SITRANS CC220 is using Siemens NTP server pool: {0..3}.siemens.pool.ntp.org. NTP time
synchronization is using UDP port 123.
7.4 Powering up SITRANS MS200
Removing the lid in a dirty environment
Do not remove the lid in a dirty environment, as contamination of internal components could
reduce battery life.
• Remove the lid only in an environment of approximately 25 °C (77 °F) and 30-60% RH.
Electrostatic discharge
• Prevent grease or other contaminants from touching PCB, as this could reduce battery life.
• Avoid direct skin contact with PCB.
38
WARNING
WARNING
Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA