Operating; Training Anomaly Detection Models - Siemens SITRANS SCM IQ Operating Instructions Manual

Digitalization smart condition monitoring with iiot sensors
Hide thumbs Also See for SITRANS SCM IQ:
Table of Contents

Advertisement

Operating

8.1

Training anomaly detection models

Once SITRANS MS200 has collected a sufficient amount of data (typically two weeks), you can
continue with the training of an anomaly detection model. After the trained model is available
you can start the model for continuous anomaly detection.
For more information, watch this video (https://www.youtube.com/watch?v=i5Khz0MKO68).
Required user roles
• Required user roles without MindSphere Subtenants:
– MindSphere user role: TenantAdmin or StandardUser
– SITRANS SCM IQ user role: sitransscmiq:admin
• Required user roles with MindSphere Subtenants:
– MindSphere user role: SubtenantUser
– SITRANS SCM IQ user role: sitransscmiq:admin
Procedure
1. Navigate to the "Sensor data modelling" tab.
2. Select an available asset to get further information.
3. To view the sensor data, click "See details".
You can change the visible time range and select one or more variables for a more detailed
view.
Smart Condition Monitoring with IIoT Sensors
Operating Instructions, 08/2021, A5E50573389-AA
Note: Do not use TenantAdmin when using Subtenants. Subtenant can not see devices
and assets of other subtenants.
8
47

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents