Figure 13 Four-Port 10/100 Ethernet Nic Front Panel Details - Nokia IP560 Installation Manual

You can configure and monitor Ethernet NIC interfaces by using Nokia
Network Voyager. Specifically, you set the port speed and full-duplex or
half-duplex mode with Network Voyager.
For information about how to access Network Voyager and the related
reference materials, see
Information"

Figure 13 Four-Port 10/100 Ethernet NIC Front Panel Details

After the power is turned on and the cables are connected, the Ethernet link
LEDs on both the IP560 and on the remote equipment illuminate to indicate
the connection. As data is transmitted, the activity LEDs on the appliance
illuminate.
IP560 Security Platform Installation Guide
Tracing through tcpdump
High bandwidth
Full-duplex mode operation up to 100 Mbps
Link speed auto advertising (10/100)
Cable autosensing
PCI operation at 133 MHz
Compliance with IEEE 802.3ab Gigabit Ethernet specifications
"Accessing Nokia Network Voyager Reference
on page 53.
1
2
3
4
Link LED (solid green)
Activity LED (blinking green)
1 2 3
Four-Port 10/100 Ethernet NIC
Ports
4
00026.2
69