Nokia IP560 Installation Manual page 147

9. Slide the chassis tray assembly back into the appliance until it clicks into
10. Resecure the chassis tray assembly retaining screws.
11. Turn on the power supply at the back of the appliance.
12. Reset the appliance date and time information by using Nokia Network
IP560 Security Platform Installation Guide
place.
SL O
T 1
SL O
T 2
The appliance should start up normally with the new battery installed. If it
does not, repeat step 1
normally after that, contact your Nokia service provider. For more
information, see "Nokia Contact Information"
Voyager or the command-line interface. The battery is required to
maintain the date and time whenever you shut down the appliance.
SL O
T 3
1
2 SL O
3
4 T 4
through step 11. If the appliance does not start up
Replacing the Battery
on page 3.
00359
147