Source Audio Ultrawave User Manual page 7

Power and Control Connections
DC 9V (Power)
Connect to the included 9 Volt DC power supply. If you would like to use a 3
power supply must be regulated at 9 Volts DC (direct current), able to source at least 150 mA
(milliamps) of current, and the plug should have a center-negative polarity.
USB
Connect your computer or mobile device (Windows or Mac) to the Ultrawave's USB port (denoted by
the icon) using a standard USB mini-B cable. The Ultrawave is a class compliant USB device, meaning
that it does not require any custom drivers. For more information about the Ultrawave's USB
capabilities, refer to the
CONTROL INPUT
The 3.5 mm C
ONTROL
Tempo Switch, Source Audio Dual Expression Pedal, and the Neuro Hub. For more information, refer
to the Expression Pedal Input
Table of Contents
USB Section of the User's Guide.
I port connects to external control devices such as the Source Audio Tap
NPUT
and Neuro Hub
Ultrawave Multiband Processor User Guide
sections of the User's Guide.
-party supply, the
rd
7