Neuro Desktop Editor User Interface - Source Audio Ultrawave User Manual

After the download process, connect your Ultrawave with a USB Type A male to mini type B male
data cable (must be data-capable, not solely a charger cable). Connect the cable from the mini USB
port on the pedal to the USB port on your computer. Once you've made the connection a blue box
will appear in the Connections field indicating that the Ultrawave is ready to be edited.
If a new firmware update is available, the Firmware Update icon (the arrow icon) will be framed in
yellow. When you click the arrow icon, you will be instructed on the updating procedure.
Occasionally, a fresh download of the Neuro Desktop Editor will be required to access future
firmware updates, and it is always a good idea to check
see if there is a newer version of the editor available for download.

Neuro Desktop Editor User Interface

The Neuro Desktop's user interface features three primary sections: Connections,
Presets.
Connections
The Connections section is located on the left side of the Neuro Desktop Editor. This field displays all
connected One Series pedals and the Neuro Hub. Each connected pedal offers the three options
listed below, from left to right:
Table of Contents Ultrawave Multiband Processor User Guide
the Source Audio Editors & Firmware page to
Sound Editor, and
22