Source Audio Ultrawave User Manual page 32

Knob Assignment: Many Source Audio pedals contain knob assignment (or re-assignment) controls
for top-level flexibility. The Ultrawave is no different. Each of the top four knobs can be reassigned
in this module from a list of parameters. The knob assignments are set and stored on a preset-by-
preset rather than global basis for ultimate flexibility of control.
Link: Clicking Link next to each knob will allow that parameter to be controlled in both channels
simulatneously.
External Control
Control up to three parameters with a Source Audio Dual Expression Pedal, Tap Tempo Switch, or
third-party expression controller via the Neuro Hub or USB-MIDI. Use the dropdown menus in the
External Control block to select the expression device (Control Source) and controlled parameter
(Control Option). Use the Min and Max fields to set the depth of the expression sweep.
Presets
The Presets section is located on the right side of the Neuro Desktop interface. There you will find a
list of all the presets and empty preset positions available in your Ultrawave. The Presets section is
also where you Save, Import, and Export presets. The buttons located at the top of the Presets field
perform the functions listed below:
Table of Contents Ultrawave Multiband Processor User Guide 32