Quick BTQ Series Installation And Use Manual page 29

5 - Installation
5.3.1 - Gearleg and motor support flange
BTQ110/125
• Proceed with fitting the gearleg with the special seal
gasket.
• For further protection against the entry of water, apply
silicone for nautical use around the point of contact be-
tween flange and tube.
• Fasten everything to the flange using the special screws
and washers.
• Assemble the motor on the flange by joining
the two elastic coupling halves.
Fasten it with the provided 4 screws and washers.
5.3.2 - Propeller fitting
BTQ110/125
• Insert the propeller A in the gearleg B, fix the propeller
with the self-locking nut C, insert anode D and lock it with
the other self-locking nut C.
WARNING: on conclusion of assembly, make
sure that the propeller is exactly positioned at
the central point of the tunnel.
ELASTIC
COUPLING
ELASTIC
COUPLING
C D
BTQ SERIES INSTALLATION AND USE MANUAL - IT EN - REV001A
BTQ series
C
A
B
EN
29