Weiser kevo convert 66102/01 Installation And User Manual page 2

1 Make sure your existing deadbolt is compatible.
If you have a standard deadbolt mounted separately from the
handle below it, it is compatible with Kevo Convert.
Compatible
2 Measure the thickness of your door.
Measure to confirm that your door is either
35 mm or 44 mm (1-3/8" or 1-3/4") thick.
3 Disassemble your existing deadbolt.
A
Make sure your door is open and extend your latch bolt.
Kevo Support: www.weiserlock.com/kevo/support
USA: 1-800-677-5625 • Canada : 1-800-501-9471
Not Compatible
Rim
Lock
35 mm or 44 mm
1-3/8"or 1-3/4"
extended
Not Compatible
Mortise
Lock
B
Remove all existing deadbolt hardware from the interior side
of your door. Keep your deadbolt exterior in place.
2 / 13
Not Compatible
Integrated
Interior
deadbolt
exterior
© 2016 Spectrum Brands, Inc.