Page 1
How to Perform the Door Handing Process: While the door is open and unlocked, enter the following default Mastercode to teach the lock the orientation of the door: 1. Press 0-0-0-0. 2. Press . You will hear one beep. 3. Press 0. 4.
Page 2
How to Add a Code: Make sure the lock is unlocked and the door is open. Enter your existing Mastercode. Press . You will hear one beep. 1 - 9 Press Press . You will hear one beep. Enter a new User Code. It must be 4-10 digits. Press .
Page 3
How to Remove a Code: Make sure the lock is unlocked and the door is open. Enter your existing Mastercode. Press . You will hear one beep. Press Press . You will hear one beep. Enter the User Code you wish to delete. Press .