Energy Settings; Logging; System; Information - Macherey-Nagel NANOCOLOR Advance Operating Instruction

Hide thumbs Also See for NANOCOLOR Advance:

Table of Contents

12.3 Energy Settings

13. System

Spectrophotometer NANOCOLOR

Clicking the Energy Settings entry opens a dialog box for setting

the energy settings. Here you can set the time after which the

device switches to standby mode. Users logged in at this time are

automatically logged out. By tapping on the device display, the

standby mode is ended. The default setting is 10 minutes.

The Auto Off (Battery) setting can be used to define the automatic

switch-off time in battery mode. This can be set in the range of

5–60 minutes. The default setting is 20 minutes.

The brightness of the display can be adjusted with the Display

Brightness slider.

In case of problems, the logging of the device can be exported

via this menu and sent to the manufacturer. To do this, connect a

USB stick to the side interface and execute the export via the

icon. The execution of the action will be acknowledged accord-

ingly in the display.

The System menu is opened by clicking on the icon

Clicking on the Information icon opens a window with informa-

tion about the device. Here you will find information about the

manufacturer, device model, serial number, firmware versions

and system ID. Have this information available when contacting

MACHEREY-NAGEL Technical Support.

Advance 1.0, 11.2020

Table of Contents

Show Quick Links

Table of Contents