Visocolor ® Powder Pillows And Visocolor ® Eco; Favorites; Result View - Macherey-Nagel NANOCOLOR Advance Operating Instruction

Measurements
11.2.4 VISOCOLOR Powder Pillows and VISOCOLOR
®

11.2.5 Favorites

11.3 Result view

The desired test can also be called up by entering the test number
(see 11.7 Test number, page 29). When the test is complete, the
result is displayed in the measurement window. Various sample
information can be entered using the
the result field (see 11.3 Result view, page 19). Removing the
tube or leaving the measuring menu ends the measuring proce-
dure and saves the result in the memory of the device.
For bio tests that must be measured against a zero solution, no
automatic measurement is performed. The measurement must
be started manually by pressing
ECO
®
VISOCOLOR Powder Pillows and ECO Test kits can be selected
®
in different ways. Calling up the method via barcode is not pos-
sible. The measuring menu of the VISOCOLOR
opened by selecting the corresponding test from the list with
VISOCOLOR PP or VISOCOLOR
®
test number (see 11.7 Test number, page 29). Depending on
the test, either the insertion of the cuvette with the zero solution
is required or a direct measurement is possible. After pressing
, the zero solution is measured and the cuvette with the sample
solution is inserted. Pressing
result is displayed in the result window. Various sample infor-
mation can be entered via the
result field(see 11.3 Result view, page 19). After removal of the
cuvette or leaving the measuring menu the result is stored in the
measurement memory of the device.
An entry from the list of favorites can be made by selecting from
the list or by entering the test number. After marking the desired
entry and confirming with
measuring the test is opened. To add an entry to the favorites
from the respective list of test kits, mark the desired entry and
press the icon. To delete a test from the favorites list, mark the
entry to be deleted and press the
When the measurement is complete, the result of the respective
measurement is displayed in the results window.
Various sample information can be entered via the icons below
the results window. Various sample information can be entered
via the icons below the results window. Via the
sample information are available, which can be arranged as favor-
ites below the measurement result. For this purpose, the slider in
Spectrophotometer NANOCOLOR
icon and the icons below
NOTICE
or .
test kits can be
®
ECO tests or by entering the
®
initiates the measurement. The
icon and the icons below the
, the corresponding window for
icon.
Advance 1.0, 11.2020
®
icon further
19