Cobra Systems VNM 4 Pro SignMaker User Manual page 21

VnM®4 Pro Templates: Formatted Signs
Fire Templates
1. Scroll to FORMATTED SIGNS and
press ENTER.
2. Select FIRE TEMPLATES and press ENTER.
3. Select a Fire Template option.
For a Fire Extinguisher sign (a) or (b) press 1
4. Select a label size option.
Press 1 for a 4 x 12 sign (a)
Press 2 for a 4 x 18 sign (b)
For a Fire Hose sign (c) or (d) press 2
4. Select a label size option.
Press 1 for a 4 x 12 sign (c)
Press 2 for a 4 x 18 sign (d)
5. Enter the quantity to print and
press ENTER.
NOTE: 4" media is required.
Aisle Markers
1. Scroll to FORMATTED SIGNS and
press ENTER.
2. Select AISLE MARKERS and press ENTER.
3. Select a Floor Marker option.
Press 1 for ARROW (e)
Press 2 for DASH (f)
4. Enter the quantity to print and
press ENTER.
Arc Flash Template
1. Scroll to FORMATTED SIGNS and
press ENTER.
2. Select ARC FLASH TEMPLATE and
press ENTER.
3. Enter the quantity to print and
press ENTER.
NOTE: Pre-printed Die-Cut Header labels are
required for this selection.
Copyright © 2020 Cobra Systems, Inc. All rights reserved
a) Ext. 4x12 b) Ext. 4x18
e) Aisle Markers, (1) Arrow
f) Aisle Markers, (2) Dash
Arc Flash and Shock
Appropriate PPE
Do not operate controls or open covers without
appropriate personal protection
Failure to comply may result in injury or death!
Refer to NFPA 70E for minimum PPE requirements.
g) Arc Flash Template
c) Hose 4x12 d) Hose 4x18
Hazard
Required
equipment.
20