Table of Contents
Advertisement
VnM®4 Pro SignMaker Setup
Connecting VnM®4 Pro Keyboard and Powering Up
1. Place printer on a flat, secure surface.
2. Make sure power switch is OFF.
3. Connect VnM®4 Pro Keyboard or PC to the VnM®4 Pro SignMaker via USB port.
4. Plug the printer into your power source, preferably using a surge protector.
5. Turn on the VnM®4 Pro SignMaker.
7
Copyright © 2020 Cobra Systems, Inc. All rights reserved
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the VNM 4 Pro SignMaker and is the answer not in the manual?
Questions and answers