Cobra Systems VNM 4 Pro SignMaker User Manual page 10

VnM®4 Pro Printer Settings
Main Menu
VnM Templates
Printer Settings
Tech Support Card
Back
Printer Settings
To Change the Print Settings of your Printer
Label Settings
Print Settings
Font Settings
Print Settings
1. Select
Enter on the keyboard.
Symbols Settings
2. Select one of the following options...
Back
Speed
- To change the printers speed.
Density
- To change the printers density.
Cutter
- To change the cutter settings.
3. Press ESC to exit to the Main Menu and
proceed with making your sign or label.
SETTINGS
Speed
SETTINGS
Density
2
1. Select
for the recommended speed
and press Enter.
Speed
Cutter
Density
Back
Cutter
1. Select the recommended density based
SETTINGS
on the ink being used and press Enter.
Speed
Black: 3-5
Back
Blue / Green / Red: 1-3
Density
Cutter
ON OFF
1. Select
or
option and press Enter.
Back
9
Select
by pressing
Select
Select
White: 10-13
Select
ur printer cutter
Select
Copyright © 2020 Cobra Systems, Inc. All rights reserved
To make changes to your printers display,
print settings or font settings, press ESC
on printers keyboard until you reach the
Main Menu. Select Printer Settings and
press Enter.
Once in the Printer Settings, you will be
able to make changes to the following...
Label Settings, Printers Speed, Printers
Printer Settings
Density and any Font or Symbol Settings.
Label Settings
To Change the Font Setings of your Printer
Print Settings
Font Settings
Symbols Settings
Font Settings
1. Select
Enter on the keyboard.
Back
2. Select your Font option and press Enter.
(Reference Fonts on Pg.21)
3. Press ESC to exit to the Main Menu and
proceed with making your sign or label.
Select Font
Bold
Normal
Italic
Select Font
Utility
Back
Pipe Marker
Symbols 1
Symbols 2
Symbols 3
Back
NOTE: See pages 21 - 22 for
fonts and symbols.
by pressing
Select
Select
Select